- info@binhkhanhsteel.com
- Thứ 2 - Thứ 7: 8h - 17h
English 
Vietnamese
Hoa Phat Steel
- Manufacturer: Hòa Phát
- Made in: Việt Nam
| Product type | Unit | BAZEM Catalogue |
Wire rods | Deformed - Bar - CB300 | Deformed - Bar - CB400 | Deformed - Bar - CB500 | |||
| (đ/kg) | (đ/kg) | (đ/piece) | (đ/kg) | (đ/piece) | (đ/kg) | (đ/piece) | |||
| Steel wire | Kg/wire | 50 | 14.600 | ||||||
| D6 - CB240T | Kg/wire | 2.500 | 14.200 | ||||||
| D8 - CB240T | Kg/wire | 2.500 | 14.200 | ||||||
| D10 - CB240T | 0 | ||||||||
| D10 | 11,7m | 7,22 | 13.950 | 100.700 | 14.150 | 102.200 | 14.150 | 102.200 | |
| D12 | 11,7m | 10,39 | 13.750 | 142.900 | 13.950 | 144.900 | 13.950 | 144.900 | |
| D14 | 11,7m | 14,16 | 13.750 | 194.700 | 13.950 | 197.500 | 13.950 | 197.500 | |
| D 16 | 11,7m | 18,49 | 13.750 | 254.200 | 13.950 | 257.900 | 13.950 | 257.900 | |
| D 18 | 11,7m | 23,4 | 13.750 | 321.800 | 13.950 | 326.400 | 13.950 | 326.400 | |
| D 20 | 11,7m | 28,9 | 13.750 | 397.400 | 13.950 | 403.200 | 13.950 | 403.200 | |
| D 22 | 11,7m | 34,87 | 13.750 | 479.500 | 13.950 | 486.400 | 13.950 | 486.400 | |
| D 25 | 11,7m | 45,05 | 13.750 | 619.400 | 13.950 | 628.400 | 13.950 | 628.400 | |
| D 28 | 11,7m | 56,63 | 13.950 | 790.000 | 13.950 | 790.000 | |||
| D 32 | 11,7m | 73,83 | 13.950 | 1.029.900 | 13.950 | 1.029.900 | |||
| D 36 | 11,7m | 93,48 | 13.950 | 1.304.000 | |||||
| D 40 | 11,7m | 115,36 | 13.950 | 1.609.300 | |||||
| D 4l | 11,7m | 121,21 | - | ||||||
| D 43 | 11,7m | 133,38 | - | ||||||
- Price does not include 10% VAT and shipping costs to the project.
- Need a detailed price for your project, Call us via hotline: 0908076568
Recognition of Hoa Phat products:
Wire rod: marked directly on the surface of the wire rod
Deformed bar: One side of deformed bar body: symbols of Hoa Phat’s logo
|
Product type: Wire rod, Round bar and Deformed bar: |
|||
|
Diameter |
Normal Diameter (mm) |
Nominal section area (cm2) |
Unit mass (kg/m) |
|
Φ6 |
6.00 |
0.283 |
0.222 |
|
Φ8,D8 |
8.00 |
0.503 |
0.395 |
|
D10 |
10.00 |
0.785 |
0.616 |
|
D12 |
12.00 |
1.131 |
0.888 |
|
D14 |
14.00 |
1.540 |
1.210 |
|
D16 |
16.00 |
2.010 |
1.580 |
|
D18 |
18.00 |
2.540 |
2.000 |
|
D20 |
20.00 |
3.140 |
2.470 |
|
D22 |
22.00 |
3.800 |
2.980 |
|
D25 |
25.00 |
4.910 |
3.850 |
|
D28 |
28.00 |
6.160 |
4.830 |
|
D32 |
32.00 |
8.040 |
6.310 |
|
D36 |
36.00 |
10.180 |
7.990 |
|
D40 |
40.00 |
12.570 |
9.870 |
|
D50 |
50.00 |
19.640 |
15.420 |
|
Standard |
Grade |
Yield Point (N/mm2) |
Tensile Strength (N/mm2) |
Elonggation (%) |
Bendable |
|
|
Bend Angle (0) |
Insider radius (mm) |
|||||
|
JIS G 3505 |
SWRM10 |
- |
- |
- |
- |
- |
|
SWRM20 |
- |
- |
- |
- |
- |
|
|
JIS G 3121 |
SR 295 |
295 min |
440 ~ 600 |
18 min (d>25mm) 20 min (d ≤ 25mm) |
180 |
1,5d (d ≤ 16) 2d (d>16) |
|
SD 295A |
295 min |
440 ~ 600 |
16 min (d>25mm) 18 min (d ≤ 25mm) |
180 |
1,5d (d ≤ 16) 2d (d>16) |
|
|
SD 345 |
345 ~ 440 |
490 min |
18 min (d>25mm) 20 min (d ≤ 25mm) |
180 |
1,5d (d>16) 2d (16 |
|
|
SD 390 |
390 ~ 510 |
560 min |
16 min (d<25mm) 18 min (d>25mm) |
180 |
2,5d |
|
|
SD 490 |
490 ~ 625 |
620 min |
12 min (d ≤ 25mm) 14 min (d ≥ 25mm) |
180 |
2.5d (d ≤ 25) 3d (d>25) |
|
|
JIS G 3101 |
SS 400 |
235 min |
400 ~ 510 |
21 min |
180 |
1,5d |
|
ASTM A 615/ A615 M – 05a |
Gr 40 |
280 min |
420 min |
11 min (d=10) |
180 |
1,75d (d ≤10) |
|
12 min (d>10) |
180 |
2,5d (d>16) |
||||
|
Gr 60 |
420 min |
620 min |
9 min (d ≤19) |
180 |
1,75d (d ≤ 16) |
|
|
8 min (19 |
180 |
2,5d (16 |
||||
|
7 min (d>25) |
180 |
3,5d (d > 25) |
||||
|
BS 4449 |
BS 460B |
460 min |
500 min |
14 min |
Bend Angle up to 45o, Bend Angle reverse 23o |
2,5d (d ≤ 16) |
|
3.5d (d>16) |
||||||
|
1. Wire rod |
||||||
|
Grade |
Chemical composition (%) |
|||||
|
C |
Si |
Mn |
P |
S |
Cu |
|
|
(Theo JIS G 3505 – 2004) |
||||||
|
SWRM 10 |
0.8 ~ 0.13 |
- |
0.30 ~ 0.60 |
0.040 max |
0.040 max |
- |
|
SWRM 12 |
0.10 ~ 0.15 |
- |
0.30 ~ 0.60 |
0.040 max |
0.040 max |
- |
|
(Theo JIS G 3503 -1980) |
||||||
|
SWRY 11 |
0.09 max |
0.03 max |
0.35 ~ 0.65 |
0.020 max |
0.023 max |
0.20 max |
|
2. Deformed bar: |
||||||||
|
Grade |
Grade old |
Yield point δ / ≥ MPa |
C |
Si |
Mn |
P ≤ |
S ≤ |
Normal Content of carbon |
|
SR235 SR295 |
SR24 SR30 |
235 295 |
- - |
- - |
- - |
0.050 0.050 |
0.050 0.050 |
- - |
|
SD295A SD295B SD345 SD390 SD490 |
SD30A SD30B SD35 SD40 SD50 |
295 295 345 390 490 |
- ≤ 0.27 ≤ 0.27 ≤ 0.29 ≤ 0.32 |
- ≤ 0.55 ≤ 0.55 ≤ 0.55 ≤ 0.55 |
- ≤ 1.50 ≤ 1.60 ≤ 1.80 ≤ 1.80 |
0.050 0.040 0.040 0.040 0.040 |
0.050 0.040 0.040 0.040 0.040 |
- - C+Mn/6 ≤ 0.50 C+Mn/6 ≤ 0.55 C+Mn/6 ≤ 0.60 |
(From catalogue Hoa Phat Steel, Page |8&9)
.jpg)
Our Partner
Introduce
Binh Khanh Trading Investment Company Limited (Binhkhanhsteel) specializes in distributing construction steel products for industrial and civil projects.
As a trusted distributor and with the experience of the steel industry of the members of founder and good cooperation with manufacturing factories, we only distribute product lines with quality reputation as well as clarified origin, in line with customer's demands.
In order to get your creditability, we always suggest properly product solutions and offer the best price policy with the motto"Creative In Sustainability...".
